VMware 5V0-41.20 Value Pack (Frequently Bought Together)

Scenario 3:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

The network administrator determines that dynamic routes to SD-WAN sites are missing at the San Jose branch router. The network administrator decides to look into the configurations of hub Edges. All SD-WAN branch sites must use a hub to communicate with the San Jose site. Best practices have been implemented at these SD-WAN sites.
Where should the administrator check first to verify if the configuration is correct?

• A. Verify that redistribution at the Dallas Hybrid Site is enabled for San Jose to use as a peering point.
• B. Verify that redistribution between the primary hub site and San Jose is enabled.
• C. Verify that the NVS feature is enabled in Cloud VPN.
• D. Verify the static routes to San Jose from all Branches are configured.

Scenario 2:
After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.
What could be preventing Edges from being able to establish dynamic tunnels?

• A. The profiles are not configured to allow dynamic branch to branch VPNs.
• B. None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.
• C. Neither profile has been configured to utilize cloud gateways.
• D. The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.

Scenario 2:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.

A network administrator has configured a Business Policy to send a specific application directly out an underlay interface. Users have complained of slow responses for that application. While troubleshooting, the network administrator finds the traffic is actually taking an overlay path to another SD-WAN Edge.
What is causing this behavior?

• A. Configuring Business Policy Direct settings have no affect on traffic flows.
• B. The other Edge location is advertising a secure route for the application's subnet.
• C. uI has been configured forcing traffic into the underlay towards the hub.
• D. Internet Backha.
• E. The underlay path is not available forcing traffic into the overlay.

Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.

Several reports have come in from branch locations indicating customers cannot reach applications being served by the hub location. The hub location has a single LAN-side port from which it should be learning dynamic routes for the subnets serving the applications.
How should the technician verify if the ports on the Edge are up and working?

• A. Look in Test & Troubleshoot under the Remote Actions and run System Health.
• B. Look in Test & Troubleshoot under the Remote Diagnostics and run System Health.
• C. Look in Test & Troubleshoot under the Remote Diagnostics and run Interface status.
• D. Look under Administration and System Settings to verify if the interfaces are configured and enabled.