[UPDATED 2024] Getting CWT-101 Certification Made Easy!
CWT-101 Exam Crack Test Engine Dumps Training With 140 Questions
CWNP CWT-101 Exam Topics:
| Section | Objectives |
|---|---|
Basic RF Characteristics (15%) | |
| Describe RF signal characteristics | - Frequency - Amplitude - Phase - Wavelength |
| Explain RF behaviors and signal propagation | - Gain and loss - Reflection - Refraction - Scattering - Free space path loss |
| Understand how to detect RF signal factors | - Wireless scanner tools - Client signal strength reports - RSSI vs. dBm - Output power vs. received signal strength |
| Understand basic RF channel plans | - Available channels by protocol - Regulatory constraints on channel selection - Best practices for channel selection - Co-Channel Interference (CCI) and Co-Channel Contention (CCC) |
| Describe the basic differences among antenna types | - Omnidirectional - Semi-directional - Highly directional - Antenna mounting kits |
| Use the appropriate external antenna when required | - Antenna pattern charts - Antenna cables and connectors - Passive antenna gain |
Wireless Device Features and Capabilities (25%) | |
| Describe device types and varying capabilities | - Laptops - Tablets - Mobile phones - Desktops - Specialty devices (video cameras, Wi-Fi peripheral connections, printers, IoT, etc.) |
| Explain the basic WLAN location processes for 802.11 wireless networks | - Passive scanning - Active scanning |
| Describe the basic steps required in the WLAN connection process for 802.11 wireless networks | - Authentication - Association - 802.1X/EAP authentication - 4-way handshake |
| Determine the RF features supported by client and IoT devices | - Supported channels - Channel widths - Transmit power - Receive sensitivity |
| Configure client and IoT devices | - Configure client drivers for optimum performance (band preference, roaming threshold, regulatory domain, etc.) for 802.11 devices
- Configure various IoT devices based on the supported protocol
|
Wireless Protocol Features and Capabilities (25%) | |
| Identify 802.11 AP features and capabilities and understand configuration options related to them | - PHY and frequency band support - Single-band vs. dual-band - Output power control - Operational modes - Multiple-SSID support - Guest access - Security features - Management interfaces (web-based, CLI, remote CLI) - Internal and external antennas - PoE support |
| Use appropriate 802.11 AP mounting kits for a specified installation location | - Wall mount - Pole/mast mount - Ceiling mount |
| Ensure proper PoE provisioning for 802.11 APs and other wireless devices, when required | - Power levels required - PoE switches - PoE injectors - Testing power availability |
| Ensure IoT devices support the appropriate protocols and configuration | - Common wireless IoT protocols - Use cases for wireless IoT protocols |
Configuration of Security Parameters (15%) | |
| Understand the basics of 802.11 standard security solutions | - WPA vs. WPA2 vs. WPA3 - Personal vs. Enterprise - 6 GHz security requirements - Pre-Shared Key - 802.1X/EAP - Common EAP methods |
| Identify legacy security technologies that should not be used | - WEP - Shared Key Authentication - Hidden SSIDs - MAC filtering |
| Understand the basic security options available for common wireless IoT protocols | |
Troubleshooting Common Wireless Connection Issues (20%) | |
| Troubleshoot connectivity problems | - Configuration errors - Interference - Poor signal strength - Driver issues - Supplicant issues - Feature incompatibility |
| Troubleshoot performance problems | - Configuration errors - Interference - Low data rates - Co-channel interference (CCI) and Co-channel contention (CCC) |
NEW QUESTION # 42
What is the term used to describe the interference caused when multiple devices compete for the same channel in RF communication?
- A. Co-Channel Interference (CCI)
- B. Antenna pattern charts
- C. Co-Channel Contention (CCC)
- D. Antenna cables and connectors
Answer: C
NEW QUESTION # 43
Which RF feature indicates the maximum power at which a device can transmit signals?
- A. Receive sensitivity
- B. Transmit power
- C. Supported channels
- D. Channel widths
Answer: B
NEW QUESTION # 44
You are configuring WPA2 for use on an AP.
What encryption method should be used to ensure the highest security?
- A. TKIP/RC4
- B. CCMP/AES
- C. TKIP/AES
- D. CCMP/RC4
Answer: B
NEW QUESTION # 45
If the AP's time is not automatically configured to match the rest of the network, what infrastructure service may be unreachable by the AP?
- A. NTP
- B. DHCP
- C. FTP
- D. DNS
Answer: A
NEW QUESTION # 46
Which factor should be considered when selecting the appropriate channel for RF communication?
- A. Antenna types
- B. Regulatory constraints on channel selection
- C. Best practices for channel selection
- D. Available channels by protocol
Answer: D
NEW QUESTION # 47
What protocol is sometimes used to access a network or user directory by a RADIUS server instead of using an internal user database?
- A. LDAP
- B. DHCP
- C. NTP
- D. EAP
Answer: A
NEW QUESTION # 48
What device type is configured to respond when a probe request is received in a BSS?
- A. Switch
- B. AP
- C. Laptop
- D. Desktop
Answer: B
NEW QUESTION # 49
What can occur when two copies of a signal wave arrive at the receiver at the same time, but 180 degrees out of phase which each other?
- A. Bits may be added to the total count
- B. Increased signal strength
- C. Signal nulling or cancellation
- D. Increased signal amplitude
Answer: C
NEW QUESTION # 50
Which of the following is a measurement unit commonly used to assess RF signal strength?
- A. Wireless scanner tools
- B. Client signal strength reports
- C. Output power vs. received signal strength
- D. RSSI vs. dBm
Answer: D
NEW QUESTION # 51
What kind of AP mounting kit is most likely to use U-brackets?
- A. Pole/mast mount
- B. Wall mount
- C. Ceiling mount
- D. Desktop mount
Answer: A
NEW QUESTION # 52
What does the term "multiple-SSID support" refer to in the context of an 802.11 AP?
- A. Support for multiple encryption protocols
- B. Support for multiple wireless channels
- C. Ability to broadcast multiple network names or SSIDs
- D. Ability to handle multiple data rates
Answer: C
NEW QUESTION # 53
How many channels are available in the 2.4 GHz frequency band in all regulatory domains?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 54
What is defined as the bending of an RF wave as it passes through a medium?
- A. Scattering
- B. Absorption
- C. Reflection
- D. Refraction
Answer: D
NEW QUESTION # 55
Which parameter represents the power of an RF signal?
- A. Gain and loss
- B. dBm
- C. Amplitude
- D. Output power
Answer: B
NEW QUESTION # 56
What are some common causes of security problems in wireless networks?
- A. Configuration errors
- B. Incorrect network keys
- C. Incompatible EAP methods
- D. Incorrect passphrases
Answer: A
NEW QUESTION # 57
You have five APs and each AP has an average of 63 connected and active clients an any given moment. Many users complain that throughput is poor on the WLAN.
You use only channels 1, 6 and 11 in 2.4 GHz on these APs and have configured them with a staggered channel plan. You are not using the 5 GHz radios available in the APs.
What action would have the most significant positive impact on performance?
- A. Change the channels to 3 and 7 on two of the APs
- B. Install two more APs in the 2.4 GHz frequency band
- C. Increase the output power on all five APs
- D. Enable the 5 GHz radios on all five APs
Answer: D
NEW QUESTION # 58
Which security measure is often mistakenly believed to provide network invisibility, but offers no actual security benefit?
- A. Shared Key Authentication
- B. Hidden SSIDs
- C. WEP
- D. MAC filtering
Answer: B
NEW QUESTION # 59
......
CWT-101 Exam Dumps Contains FREE Real Quesions from the Actual Exam: https://pass4sure.practicetorrent.com/CWT-101-practice-exam-torrent.html